Thanks to their high shear efficiency, shear pumps serve as critical solids control equipment for polymer dilution and hydration. They address the challenge of directly hydrating high-viscosity, high-molecular-weight polymers by providing high-flow-rate, high-head pretreatment, thereby meeting the requirements of the slurry preparation process. Below are common faults and recommended solutions to ensure optimal performance: Packing

Mud agitators are crucial components of drilling mud solids control systems, widely used in activated sludge storage tanks to prevent suspended solids from settling to the tank bottom. As a manufacturer of solids control equipment, HL Petroleum offers mud agitators ranging from 4 to 30 horsepower, using FAG bearings and SOG oil seals. HL Petroleum’s

Working Principle of a Shear Pump A shear pump is a specialized device that shears polymers and clays in drilling fluid. Operators must thoroughly shear and mix polymers (or clays) before they enter the drilling fluid system to fully utilize their properties and optimize drilling fluid performance. Without shearing, the polymer drilling fluid can clog

Working Principle of a Vertical Cuttings Dryer Oilfield professionals are familiar with cuttings drying system, which are used to process oil-based mud without dropping it onto the floor. So, what is the working principle and workflow of a vertical cuttings dryer? Today, HL’s sales staff will provide a brief introduction. For a more in-depth understanding

Daily Maintenance of a Drilling Fluid Centrifuge Before operating a drilling fluid centrifuge, turn off the power and release the centrifuge brake. Manually rotate the drum to check for any signs of seizure. Check for any loose or abnormal parts. Connect the power and start the centrifuge in a clockwise direction (it typically takes about